Well.. I did power cycle the DLT in the L280. And the messages went away for about an hour. I wound up getting the drive replaced, and replacing a couple tapes that had been frozen. After a bit of mucking around trying to get support from Veritas, I did manage to get things working. Seems that the latest patch stomps on the st.conf file as well.. Thanks for the tips sue Original Post I've been having trauma with my DLT running netbackup... Here's the nasty messages... p 7 17:02:26 wolf tsdd[675]: TSD(0) [216] test_ready failed Sep 7 17:02:26 wolf tsdd[675]: TSD(0) [216] Sense Key: Hardware Error (0x4) Sep 7 17:02:26 wolf tsdd[675]: TSD(0) [216] ASC 0x40, ASCQ 0x80 Sep 7 17:02:26 wolf tsdd[216]: TSD(0) unavailable: initialization failed: Robot busy, cannot perform operation I guess I need to reboot the Robotic drive.. only it's at a datacenter.. Anyway I can diagnose this remotely?? Or should I get Sun hardware support to check it out? Other details.. Just put in the latest netbackup patch . The machine is a Sparc 20 running Solaris 7. sue _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Sep 18 12:10:33 2001
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:25 EST