Hi, Thanks to Frans Tigelaar, Jay Lessert and Mike's List for your attention and your response. Unfortunately my engine still got the problem, I could not move back /opt/usr to /usr, cause no space left on this device. And I already make the link from /usr to /opt/usr, but still not working, maybe I should re-install it. Thanks, God Bless You All Regards Tutut --------------------------------------------------- ----- Original Message ----- From: Frans Tigelaar To: 'Meneer Tutut' Sent: Tuesday, November 20, 2001 11:47 PM Subject: RE: failed to open /dev/dump If you can, make a link /usr that links to /opt/usr . If that doesn't work than you can boot from cdrom and make the link. Reboot ... and ready you are. Frans ----------------------------------------------------------- ----- Original Message ----- From: Jay Lessert <jayl@accelerant.net> To: Meneer Tutut <tdwitoto@cbn.net.id> Sent: Tuesday, November 20, 2001 10:57 AM Subject: Re: failed to open /dev/dump > You're in serious trouble. You understand what your "system engineer" > did, right? He destroyed your /usr. No /usr/bin. No /usr/lib. > > This has nothing to do with telnet or console. This has nothing to do > with dumpadm. > > The things you can do are: > > 1) Get an OS CDROM in the CDROM drive, 'boot cdrom -s', mount the > file system that used to contain /usr, mount the file system > that contains /opt, put the contents of /usr back where they > should be, reboot and pray. > > 2) If you can't get a CDROM in the drive (because you don't have > physical access, or the system doesn't have a drive), install > a boot server, 'boot net -s' and proceed as in 1). > > 3) Re-install the system. > > -- > Jay Lessert > Accelerant Networks Inc. > Beaverton OR, USA --------------------------------------------------------- ----- Original Message ----- From: Mike's List <mikelist@sky.net> Sent: Tuesday, November 20, 2001 10:38 AM Subject: Re: failed to open /dev/dump > If your admin moved /usr to /opt/usr (bad by the way) you need to specify > /opt/usr as all the system resources been moved from it's original > directory... > > /usr/lib/devfsadm/devfsadm --> /opt/usr/lib/devfsadm/devfsadm > /usr/bin/who --> /opt/usr/bin/who...and so on... > > > - Mike ------------------------------------------------------ ----- Original Message ----- From: Meneer Tutut <tdwitoto@cbn.net.id> To: <sunmanagers@sunmanagers.org> Sent: Tuesday, November 20, 2001 9:04 AM Subject: failed to open /dev/dump > Dear All, > > My Ultra 5 have space on /usr become 100%, so my system engineer moved our > /usr to /opt/usr by telnet not via console, the result we've got the error > message below. I need your help cause I can not run "dumpadm" > > Thanks > Tutut > > ======================================== > Rebooting with command: boot > Boot device: disk File and args: > > SunOS Release 5.7 Version Generic_106541-09 64-bit [UNIX(R) System V > Release 4.0] > Copyright 1983-1999 Sun Microsystems, Inc > Hostname: engine5 > Killed > > Warning : failed to open /dev/dump (No such or address) : run dumpadm(1M) to > verify dump configuration. > > /etc/rcS.d/S50devfsadm : /usr/lib/devfsadm/devfsadm : not found > /etc/rcS.d/S50devfsadm : rm : not found > /etc/rcS.d/S50devfsadm : ln : not found > > /sbin/rc2 : /usr/bin/who : not found > /sbin/rc2 : /usr/bin/uname : not found > /sbin/rc2 : test : unknown operator S > > /sbin/rc3 : /usr/bin/who : not found > /sbin/rc3 : /usr/bin/uname : not found > /sbin/rc3 : test : argumen expected > > INIT : command is respawning too rapidly. Check for possible errors. > > id : sc "/usr/lib/saf/sac -t 300" > > INIT : command is respawning too rapidly. Check for possible errors > > id : co "/usr/lib/saf/ttymon -g -h -p" 'uname -n ' > console login : " -T Sun -d /dev/console -l console -m | dterm, > ttcompat" > =================================================== _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Sun Nov 25 21:00:27 2001
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:28 EST