SUMMARY:SCSI options for SunBlade 100

Just 2 answers from the list on this, but also some feedback
from the php forum at: http://sunblade100.wells.org.uk/.
I was a bit over-paranoid in assuming this was going to cost
me an arm and a leg, but it turns out to be pretty damn cheap!!
- all the options offered are well within reason. Full answers
and the original post are below.

Also, I just racked up my blade with 128MB DIMMs at 75 zloty each
(translate that as 'they're giving them away!' in your local 
currency). I'm glad I steered clear of that grotty old sparc10
on Ebay after all ;-). Hopefully Santa will be forthcoming with
the scsi card and disk as well :-).

No answer on the firewire, but just interested, no love lost.

Thanks to:

Helen Petropoulos <eleni@lizard.unm.edu>
Peter Stokes <peter@ashlyn.co.uk>
zothorn@yahoo.com

cheers all,

Mike Kiernan


> Author: Stonent (---.alntn1.tx.home.com)
>  Date:   11-25-01 21:00
> 
>  From sunhelp.org 
> 
>  "Dual-channel Symbios UW cards are in the $75 range right now, and are
>  fully supported by OBP including booting. This chipset is used in the
>  current Ultra line (U30/60/450 and others) as the native SCSI interface
>  (driver name is glm). Sun's dual-channel SCSI cards are just Symbios
>  53c875-based cards, they don't even change the name on the label."
> 
>  Thats worth a try
> 
> Hi Mike
> 
> Stick to the Sun cards and their LSI equivalents. X5101A equivalent is
> 3140U.
> 
> Peter

> 
> Hello Michael,
> 
> We just purchased a PCI scsi card for our Blade 100 from Sun.  It cost
> about $150.00. It's a single-channel, single-ended card and it works just
> fine.  You can purchase a multi-channel card for more money, depending on
> your needs, but if it's just a disk or two, the first option should be all
> that you need. 
> 
> Don't know about the firewire.
> 
> Good luck,
> 
> Helen
> 


-------- Original Message --------
Subject: SCSI options for SunBlade 100
Date: Thu, 22 Nov 2001 10:50:51 +0100
From: Michael Kiernan <mkiernan@onet.pl>
Organization: Onet.pl S.A.
To: sunmanagers@sunmanagers.org

I'd like to know what options there are for a SCSI
card and disk for sunblade 100's. I'm not fussed about 
linux, just needs to run under solaris for now.

Also, I have a feeling I shouldn't ask, but does
anyone know what the story is with Blade's and Firewire?

many thanks,

Mike Kiernan



-- 
Michael Kiernan
Onet.pl S.A.
Krakow, Poland
http://www.onet.pl/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers