Thank you to Steve Camp for responding. After talking with Sun and receiving the "Preparing the RAID Module as a Boot Device" document, the system rebooted successfully. The basic procedure for Solaris 8 and RM6.22.1 is this (there is a slightly different on for earlier releases): 1. Install OS and patches 2. Install RM6 3. Edit rmparams if greated than 8 LUN's needed 4. Edit sd.conf if reboots need to be speeded up 5. Run /etc/init.d/rdacctrl config 6. Edit /etc/system to add the line: rootdev:/pseudo/rdnexus@C/rdriver@T,0:a (where C coresponds to the controller number and T coresponds to the target number) 7. Boot -r 8. Update firmwares. Thank you again. Sarah > I am trying to reinstall an E5500 with an A3500 > setup in 2x7 configuration with Solaris 8 and Raid > Manager 6.22.1. All was well until the the reboot > after the rm6.22.1 install. Now the pathing to the > boot device is out of sorts and it can no longer mount > /(root). I keep coming up to dead-ends on Sun's site > and we do not have a maintenance agreement with them > yet (inherited hardware.) Any help will be appreciated > and I can start from scratch if needed. > > Thank you, > Sarah > _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Dec 13 15:18:15 2001
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:30 EST