Thank you to: Greg Ulyatt Thomas Knox Jay Lessert Derrick Daugherty Darren Dunham In general one common thing in their answer was to check whether both end of connection are set to full (or both to half) duplex. This is the answer. I had to change value of hme:hme_adv_100hdx_cap and it solved my problem (of course I put the settings into /etc/system then). Below is original question. przemol ----- Forwarded message from przemolicc@poczta.fm ----- > From: przemolicc@poczta.fm > To: sunmanagers@sunmanagers.org > Subject: network transmission errors > Date: Wed, 6 Jun 2001 09:08:04 +0200 > > I was recently playing with SE Toolkit and found out that there are > many transmission errors in our E 450 server (it is running 3 oracle's > instances). Examples: > # uptime > 8:54am up 73 day(s), 11:41, 4 users, load average: 0.62, 0.85, 0.78 > # uname -a > SunOS foxtrot 5.7 Generic_106541-08 sun4u sparc SUNW,Ultra-4 > # ../bin/se netstat.se > Current tcp RtoMin is 200, interval 5, start Wed Jun 6 08:55:01 2001 > > Name Ipkt/s Opkt/s Err/s Coll% NoCP/s Defr/s tcpIn tcpOut Conn/s %Retran > hme0 215.6 215.0 0.40 0.00 0.00 0.00 11258 15040 0.00 0.07 > hme0 18.4 17.6 0.20 0.00 0.00 0.00 1590 1291 0.00 0.00 > hme0 272.0 274.6 0.40 0.00 0.00 0.00 6709 15624 0.00 0.08 > hme0 282.0 283.0 0.00 0.00 0.00 0.00 7253 16556 0.00 0.00 > hme0 442.8 442.4 0.40 0.00 0.00 0.00 10754 25828 0.00 0.04 > hme0 173.4 174.0 0.40 0.00 0.00 0.00 5669 9326 0.00 0.02 > hme0 53.4 53.0 0.40 0.00 0.00 0.00 1382 3002 0.00 0.00 > hme0 533.2 533.4 0.20 0.00 0.00 0.00 12044 30144 0.00 0.00 > hme0 315.0 316.0 0.20 0.00 0.00 0.00 7943 18864 0.00 0.00 > hme0 304.2 304.6 1.00 0.00 0.00 0.00 8180 17121 0.00 0.11 > hme0 35.4 36.2 0.00 0.00 0.00 0.00 1104 1913 0.00 0.52 > hme0 298.8 299.6 0.20 0.00 0.00 0.00 7155 17675 0.00 0.06 > hme0 118.2 117.6 0.20 0.00 0.00 0.00 3839 7285 0.20 0.00 > hme0 110.0 110.6 0.00 0.00 0.00 0.00 3281 6545 0.20 0.00 > > [columns: Err/s and %Retran] > > # netstat -i > Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue > lo0 8232 loopback localhost 59762 0 59762 0 0 0 > hme0 1500 foxtrot foxtrot 79749157 232502 75623906 0 0 0 > > # ../bin/se netstatx.se > Current tcp minimum retransmit timeout is 200 Wed Jun 6 09:04:54 2001 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 42.0 0.2 40.2 0.0 0.0 0.00 1942 2900 0 0.52 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 31.0 0.0 30.2 0.0 0.0 0.00 1802 2361 0 0.00 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 154.2 0.0 159.8 0.0 0.0 0.00 5354 9232 0 0.00 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 113.4 0.0 116.8 0.0 0.0 0.00 9346 6581 0 0.00 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 56.0 0.2 59.0 0.0 0.0 0.00 3916 3179 0 0.00 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 38.0 0.2 40.6 0.0 0.0 0.00 3187 1806 0 0.00 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 76.4 0.6 79.0 0.0 0.0 0.00 5945 4243 0 0.35 > > Name Ipkt/s Ierr/s Opkt/s Oerr/s Coll/s Coll% tcpIn tcpOut DupAck %Retran > hme0 60.6 0.2 60.2 0.0 0.0 0.00 4746 3351 0 0.06 > > How I can find out what is making errors ? > Should I worry or it is standard "level" of errors ? > > przemol > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers > ----- End forwarded message -----Received on Thu Jun 7 08:17:20 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:24:56 EDT