This is a multipart message in MIME format. --=_alternative 003487FF80256A7E_= Content-Type: text/plain; charset="us-ascii" HI, Thanks to all who responded with several good ideas but the prize goes to Mark MacManus and Gerard Henry who came up trumps. To quote Mark:- The following should show you which boards are assigned to which link. sc-omni2# ls -l /dev/fb* lrwxrwxrwx 1 root root 27 Jun 18 15:54 /dev/fb -> /devices/SUNW,ffb@1e,0:ffb0 lrwxrwxrwx 1 root root 8 Apr 13 08:14 /dev/fb0 -> fbs/ffb0 lrwxrwxrwx 1 root root 8 Apr 13 08:14 /dev/fb1 -> fbs/m640 [snip] The following file will show you which one is the console. (first device defined "fb0" which is the "ffb" card) sc-omni2# tail -1 /etc/dt/config/Xservers :0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -nobanner -dev /dev/fb0 -dev /dev/fb1 These should give specific information (as root). sc-omni2# /usr/sbin/m64config -dev /dev/fbs/m640 -prconf --- Hardware Configuration for /dev/fbs/m640 --- ASIC: version 0x41004754 DAC: version 0x0 PROM: version 106 Card possible resolutions: 720x400x85, 640x480x60, 640x480x72, 640x480x75 800x600x56, 800x600x60, 800x600x72, 800x600x75, 1024x768x60 1024x768x70, 1024x768x75, 1280x1024x75, 1024x768x85, 800x600x85 640x480x85, 1280x1024x60, 1152x900x66, 1152x900x76, 1280x1024x67 1600x1280x76, 1280x800x76, 1440x900x76, 1600x1000x66 1600x1000x76, 1280x1024x85, 1280x1024x76, 1152x864x75 1600x1200x75, 1024x768x85, 800x600x75, 640x480x85, vga, svga 1152, 1280, 800x600, 1024x768, 1280x1024, 1152x900, 1600x1280 1600x1000, 1600x1200 Monitor possible resolutions: 720x400x70, 720x400x85, 640x480x60 640x480x67, 640x480x72, 640x480x75, 800x600x56, 800x600x60 800x600x72, 800x600x75, 832x624x75, 1024x768x87, 1024x768x60 1024x768x70, 1024x768x75, 1280x1024x75, 1152x900x66, 1152x900x76 1280x1024x67, 1280x1024x76, 800x600x75, vga, svga, 1152, 1280 800x600, 1024x768, 1280x1024, 1152x900 Possible depths: 8, 24 Current resolution setting: 1280x1024x76 Current depth: 8 sc-omni2# sc-omni2# /usr/sbin/fbconfig -dev /dev/fbs/ffb0 -prconf The key bit being the setting of the card in the /etc/dt/config/Xservers file. Of course if you haven't set up the CDE environment then these files are actually in /usr/dt/config and need to be copied to /etc/dt to take effect. A few other pointed out that I could tell which was the m64 card as it would have VGA output whilst the ffb card has the large output socket (whose type I dont' know). Thanks to you all, Bernard McAuley, --=_alternative 003487FF80256A7E_= Content-Type: text/html; charset="us-ascii" <br><font size=2 face="sans-serif">HI,</font> <br> <br><font size=2 face="sans-serif">Thanks to all who responded with several good ideas but the prize goes to Mark MacManus and Gerard Henry who came up trumps. To quote Mark:-</font> <br> <br><font size=2 face="Courier New">The following should show you which boards are assigned to which link.<br> <br> sc-omni2# ls -l /dev/fb*<br> <br> lrwxrwxrwx 1 root root 27 Jun 18 15:54 /dev/fb -> /devices/SUNW,ffb@1e,0:ffb0<br> lrwxrwxrwx 1 root root 8 Apr 13 08:14 /dev/fb0 -> fbs/ffb0<br> lrwxrwxrwx 1 root root 8 Apr 13 08:14 /dev/fb1 -> fbs/m640<br> [snip]<br> <br> <br> <br> The following file will show you which one is the console.<br> (first device defined "fb0" which is the "ffb" card)<br> <br> sc-omni2# tail -1 /etc/dt/config/Xservers<br> :0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -nobanner -dev /dev/fb0 -dev /dev/fb1<br> <br> <br> <br> These should give specific information (as root).<br> <br> sc-omni2# /usr/sbin/m64config -dev /dev/fbs/m640 -prconf<br> <br> --- Hardware Configuration for /dev/fbs/m640 ---<br> ASIC: version 0x41004754<br> DAC: version 0x0<br> PROM: version 106<br> Card possible resolutions: 720x400x85, 640x480x60, 640x480x72, 640x480x75<br> 800x600x56, 800x600x60, 800x600x72, 800x600x75, 1024x768x60<br> 1024x768x70, 1024x768x75, 1280x1024x75, 1024x768x85, 800x600x85<br> 640x480x85, 1280x1024x60, 1152x900x66, 1152x900x76, 1280x1024x67<br> 1600x1280x76, 1280x800x76, 1440x900x76, 1600x1000x66<br> 1600x1000x76, 1280x1024x85, 1280x1024x76, 1152x864x75<br> 1600x1200x75, 1024x768x85, 800x600x75, 640x480x85, vga, svga<br> 1152, 1280, 800x600, 1024x768, 1280x1024, 1152x900, 1600x1280<br> 1600x1000, 1600x1200<br> Monitor possible resolutions: 720x400x70, 720x400x85, 640x480x60<br> 640x480x67, 640x480x72, 640x480x75, 800x600x56, 800x600x60<br> 800x600x72, 800x600x75, 832x624x75, 1024x768x87, 1024x768x60<br> 1024x768x70, 1024x768x75, 1280x1024x75, 1152x900x66, 1152x900x76<br> 1280x1024x67, 1280x1024x76, 800x600x75, vga, svga, 1152, 1280<br> 800x600, 1024x768, 1280x1024, 1152x900<br> Possible depths: 8, 24<br> Current resolution setting: 1280x1024x76<br> Current depth: 8<br> <br> sc-omni2# <br> <br> <br> sc-omni2# /usr/sbin/fbconfig -dev /dev/fbs/ffb0 -prconf</font><font size=2 face="sans-serif"> </font> <br> <br><font size=2 face="sans-serif">The key bit being the setting of the card in the /etc/dt/config/Xservers file. Of course if you haven't set up the CDE environment then these files are actually in /usr/dt/config and need to be copied to /etc/dt to take effect. A few other pointed out that I could tell which was the m64 card as it would have VGA output whilst the ffb card has the large output socket (whose type I dont' know).</font> <br> <br><font size=2 face="sans-serif">Thanks to you all,</font> <br> <br><font size=2 face="sans-serif">Bernard McAuley,<br> </font> --=_alternative 003487FF80256A7E_=--Received on Tue Jul 3 10:33:19 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:24:58 EDT