SUMMARY: Netra X1 IP Setup Problem

From: Scott Grantham <scott.grantham_at_sandcherry.com>
Date: Mon Aug 20 2001 - 14:42:29 EDT
Thanks to everyone who responded, although some answers I got did not =
apply
to the situation.  I ended up following William Hathaway's advice and =
told
it not to configure networking and then editing the following files by =
hand:
 /etc/hosts
 /etc/hostname.dmfe0
 /etc/netmasks
 /etc/defaultrouter
 /etc/resolv.conf
 /etc/nsswitch.conf

Now everything seems to be running smoothly.  Thanks again.

-Scott Grantham
Sand Cherry Networking



-----Original Message-----
From: Scott Grantham [mailto:scott.grantham@sandcherry.com]
Sent: Friday, August 17, 2001 5:51 PM
To: 'sunmanagers@sunmanagers.org'
Subject: Netra X1 IP Setup Problem



I have a brand new out of the box Netra X1 that is not taking the IP =
address
I am trying to assign it with the Network Connectivity walkthru.  It =
asked
if the box is going to be networked (Y), asks if I want DHCP (N), the
hostname, the IP address, if I need IPv6 (N), and then when I hit F2 on =
the
Confirm Information screen I get this:

=C4 System Identification Error
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4

  An error occurred while trying to set the IP address x.x.x.x on the
  network interface.

  > Press F2 to dismiss this message.

Pressing F2 restarts the Network Connectivity walkthru and pressing F6 =
for
help does nothing.

I've tried several resets, poweroffs, different IP addresses, etc with =
no
luck. =20

Has anyone seen this, or have any ideas what might be going on?

Thanks,
-Scott Grantham
Sand Cherry Networks
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Mon Aug 20 19:42:29 2001

This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:25:02 EDT