Folks - Thanks for the quick responses. The problem was on the client side and switching to the serial B port worked (rebooting now so that I can use serial on the client). Thanks, Debbie The responses were ... John Marrett: #. is supposed to abort back to the lom prompt. Is it possible that you need to reboot the client machine (or soft reset it, or restart tip or whatever you are using, etc..) Netra T1's currently have an issue where some of them hang and don't respond at all, however if you rebooted it it shoudl respond. I would think that perhaps it's the other end that is the problem... Jeff Welsch: In the console session you can enter #. to cause the system to break to LOM, if that is what you mean. Hope this helps. My original message: OK, I've got a loaner Netra T1 that I'm trying to setup but am having major difficulties. I've got it serially connected to another loaner Sun system and had a LOM prompt, but could not run the initial setup to get it connected on the network (since we don't have NIS servers on the same subnet with the system). So I went thru the setup for a non-networked connection so that I could get to a command prompt and then was editing the files by hand to setup networking. However, I inadvertently cat'ed a binary file (more auto* -- oops) and now I am unable to get the LOM prompt back again. I've tried booting the system to see if it would come up on the net, but it's not doing that either. So, at this point I have neither a system prompt nor a LOM prompt. Is there a way to reset LOM (without needing a local system prompt)? Or how can I now "talk" to this system to fix things? -- +== Debbie Tropiano == Mommy to Nathan 8/17/95 & ^Sara^ 10/25/00-11/7/00 ==+ | God shows His opposition to cancer and birth defects, not by | | eliminating them or making them happen only to bad people (He | | can't do that), but by summoning forth friends and neighbors to | | ease the burden and to fill the emptiness. -- Harold S. Kushner | +== debbie_at_icus.com ============= URL http://www.icus.com/personal.html ==+Received on Thu Aug 23 21:25:59 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:25:02 EDT