OK, thanks to the handful of people who started helping me troubleshoot... BUT... I finally found it in the reference manual --there is no internal SCSI chain back to the main board -- a well-placed scsi cable between the IO and disk boards did a world of good. Thanks again for those who offered help! Now, back to troubleshooting the 2 NICs. Andy -----Original Message----- From: Andy Chandler Sent: Friday, August 24, 2001 2:14 PM To: sunmanagers@sunmanagers.org Subject: disk board on E4500 disabled Hello again Managers, Still working on jumpstarting my E4500 (and not able to test any of the suggestions from my previous question). I have a new and bigger issue.... The internal drive board on the E4500 shows a single amber light, which apparently represents "disabled". Here's part of the prtdiag output: Detached Boards =============== Slot State Type Info ---- --------- ------ ----------------------------------------- 3 disabled disk Disk 0: Target: 10 Disk 1: Target: 11 I can't seem to find much documentation on troubleshooting this. Any thoughts? Will summarize when fixed. Thanks in advance! Andy Chandler Systems Administrator DICE.COM 515-313-2068 Phone 515-280-1452 FAX AndyC@dice.com http://www.dice.comReceived on Fri Aug 24 20:56:35 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:25:02 EDT