Hello managers. Thank you for your replies. In fact normally i couldn't change the scsi id's from internal disks of an ultra 1, but with one type of disks it works and this were a seagate disk. By setting the jumpers of both disks to my desired id the second disk is "or-ed" to the next one. For example: - default is 0 and 1 - set the jumpers of both disks to id 2 -> first disk is 2, second disk is 3 I have tried this with 2 ibm disks, 2 seagate disks and 2 connor disks and only with seagate it works. But this is with no warranty. Wolfgang Here my orginal question: >Hello managers. > >How could i change the scsi id of the internal disks of an ultra 1. >Default they have the ids 0 and 1 but i need the ids 2 and 3. >Jumpersettings of the disks are ignored. > >Wolfgang ------------------------------------------------------------------------ Wolfgang Leideck ONSYS GmbH Fon: +49 (0)621/60-44104 Fax: +49 (0)621/60-73744 E-Mail: Wolfgang.Leideck@onsys.de _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Jan 17 02:19:19 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:32 EST