My original question was: My Ultra 5 already has a PGX24 graphics card and an LSI SCSI card installed. Will I be able to install a SunPCi 400 without removing any of the existing cards. The answers from the list were encouraging, so I went ahead and bought a Sun PCi 400. It is designed only to fit in slot3 (which is the top slot on the left side). The slot below is still usable if you dont use the SunPCi serial and parallel connectors, provided the card you put in it is not too long, as it will touch the CPU heatsink if its too long. So I was able to keep all cards and put the SCSI in slot 1, and the graphics in slot 2. Not using the SunPCi parallel and serial port was no problem for me. Regards Paul -- Paul Richards _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Sun Feb 17 13:50:19 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:34 EST