I had asked about this in January and finally got my rackmount kit for the 450, so I tried it this morning. It worked just fine, except for Disk Suite complaining about a missing drive. The second of my mirrored drives moved from t8 to t1, so I had to remove them from the metadb, reboot, metareplace them, and readd them to the metadb. I did boot with -r and it went fine. The 250 had a raptor gfx card that also made the move, the X server was happy with it's location. The only thing that came out wrong is that the tape drive switched locations, so I have rmt/0 that doesn't work, and my dds-3 drive moved to rmt/1. Thanks again for the help. dave On Fri, 18 Jan 2002, Dave Weis wrote: > Many thanks to the following people: > Heilke, Rainer > Bill Voight > Briscoe, Kris > Caparroso, Nelson > Jonathan A. Zdziar > Jonas Blberg > Andrew_Rotramel > > There wasn't a complete consensus, but almost everyone agreed that I could > work. I looked at the physical path for disk 0 on both machines and they > were the same. In addition, the bootblk for both machines seemed to be the > same file. > > I won't be able to try it until I get my E450 rackmount kit, but I'm > confident that it will work. > > Thanks for the help! > > dave > > > On Mon, 14 Jan 2002, Dave Weis wrote: > > I have an E250 with two internal drives that I would like to replace with > > an E450. Would everything work correctly to pull the drives, put them in > > the E450, boot from cdrom, and then run installboot again? What would the > > correct installboot incantation be for something like that? > > -- Dave Weis "I believe there are more instances of the abridgement djweis@sjdjweis.com of the freedom of the people by gradual and silent encroachments of those in power than by violent and sudden usurpations."- James Madison _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Feb 28 11:53:29 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:35 EST