My original question: is it possible to upgrade a Sun Blade 100 with a standard PC133 512MB registered ECC DIMM ?? The Answer is NO for me! As I found out, after trying to use a 512MB registerd ECC Ram, the Blade wouldn't even start up. The only configuration that showed me a ok prompt was 512MB Dimm in Slot0 and 128MB Dimm in Slot1, but then the system wasn't able to boot (neither from disk nor cdrom nor net). Always gave some errors (stack problem, file not executable...) The Dimm was ok ( tested it with a PC-System, worked fine). I changed the DIMM with a 512MB ECC unbufferd CL-3 and this worked fine. Don't know if the problem was that the DIMM was of tpye registered or if it is of CL-2 or CL-2.5. So I would say just use ECC RAM type CL-3. locations to buy RAM for Sun systems: www.crucial.com www.kingston.com a good link for Sun Blade 100 related problems (and a unofficial FAQ) http://sunblade100.wells.org.uk/ Thanks for the really fast replies to: Brett Edstene Tim Chipman Rivera, Angel R Marcelino Mata Ryan A. Krenzis Price, Chris Emma Torrens Mike Christian _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Feb 28 15:02:26 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:35 EST