Thanks to Joachim Krumlinde, Lars Hecking, Naxhije Selimaj, and Tommy Fallsen who all answered within 5-10 minutes. The correct stanza is: set eri:adv_100T4_cap=0 set eri:adv_100hdx_cap=0 set eri:adv_10fdx_cap=0 set eri:adv_10hdx_cap=0 set eri:adv_100fdx_cap=1 set eri:adv_autoneg_cap=0 Tommy also sent the command I could have used to figure this out if I wasn't trying to work before I had my coffee: ndd -get /dev/eri \? < cut > adv_autoneg_cap (read and write) adv_100T4_cap (read and write) adv_100fdx_cap (read and write) adv_100hdx_cap (read and write) adv_10fdx_cap (read and write) adv_10hdx_cap (read and write) < cut > Thanks again. Jon On Wed, Apr 17, 2002 at 08:48:55AM -0400, Jonathan Burelbach scribbled: > How do I set the network interface on the sunblade 100 to 100Full? I've > tried the same stanza in /etc/system as I've used on hme's, but it claims > "sorry, variable 'eri_adv_100hdx_cap' is not defined in the 'eri' module" > > Here's the stanza: > set eri:eri_adv_100T4_cap=0 > set eri:eri_adv_100hdx_cap=0 > set eri:eri_adv_10fdx_cap=0 > set eri:eri_adv_10hdx_cap=0 > set eri:eri_adv_100fdx_cap=1 > set eri:eri_adv_autoneg_cap=0 > > TIA, > Jon > > > -- > =========+=========+=========+=========+=========+=========+=========+ > Jonathan Burelbach jburelba@mail.nih.gov > Unix Systems Administrator jburelba@topaz.cit.nih.gov > NIH/CIT/DCSS/SOSB;12 South Dr.;Bldg 12B/2N207;Bethesda (301) 496-7372 > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers -- =========+=========+=========+=========+=========+=========+=========+ Jonathan Burelbach jburelba@mail.nih.gov Unix Systems Administrator jburelba@topaz.cit.nih.gov NIH/CIT/DCSS/SOSB;12 South Dr.;Bldg 12B/2N207;Bethesda (301) 496-7372 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Apr 17 09:14:23 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:40 EST