First of all, Thanks to everyone who replied and took time to help me with this. Huge thanks to Steve Camp!! After further review, I found that at some point external disk were connected up wrong. The format command reveled that I had a c2t3d0s6 and a c3t3d0s6 and NO c1t3d0s6. To resolve, I ran the following commands: 1. ensured I had a good backup of this filesystem 2. metareplace d80 c1t3d0s6 c3t3d0s6 (wait until state was ok) 3. metareplace -e d80 c2t2d0s6 ------------------------------------------------- -----Original Message----- From: Jeff Wellens [mailto:jeffw@pbs.com] Sent: May 07, 2002 8:58 AM To: sunmanagers@sunmanagers.org Subject: Disksuite problem. Hello All - I have an issue with disksuite where both sub-mirrors are in a "Needs Maintenance" state. The funny thing is that it may have been this way for a while as the mounted filesystem for this device is working just fine. Both drives appears fine as well. What is the best way for me to go about resolving this and not lose any data on this filesystem? Here is the output of metastat for this metadevice: d80: Mirror Submirror 0: d81 State: Needs maintenance Submirror 1: d82 State: Needs maintenance Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 35358848 blocks d81: Submirror of d80 State: Needs maintenance Invoke: metareplace d80 c1t3d0s6 <new device> Size: 35358848 blocks Stripe 0: Device Start Block Dbase State Hot Spare [Jeff Wellens] 0 No Maintenance d82: Submirror of d80 State: Needs maintenance Invoke: after replacing "Maintenance" components: metareplace d80 c2t3d0s6 <new device> Size: 35358848 blocks Stripe 0: Device Start Block Dbase State Hot Spare c2t3d0s6 0 No Last Erred Thanks! Jeff Wellens Technical Support Analyst jeffw@pbs.com _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed May 8 11:34:38 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:42 EST