Thanks to: Charles Rawls <crawls@tgix.com> Paul Galjan <galjanpa@cmr.gov> "Moore, L. Bryan" <lbmoore@scrippsops.com> There's a jumper, J3001, that needs to be switched for the CPU speed. However, when I switched it and installed the 400MHz, the OBP banner reports 250MHz. I wonder if this system is too old to make use of a 400? Any additional thoughts? One response said that you need minimum: CPU board 501-3132-13 POST > 3.3.8 OBP > 3.12 V10 -Adam On Tue, 9 Jul 2002, Adam and Christine Levin wrote: > We're currently moving some hardware around, and I've got two E250s open > on the floor of the systems room. We swapped 2x300MHz UltraSPARC II procs > out of one and into the other. The other had 1x400MHz UltraSPARC II. The > first system refuses to boot with the 1x400 -- it boots fine with 2x300, > but when I swap in the 1x400, the power comes on, the drives spin up, and > nothing else happens. > > Thoughts? > > -Adam _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Jul 10 17:27:55 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:49 EST