SUMMARY:exec exit fault on xerox printer

Since I got an email asking for solution, Here is the summary if I forgot to
post it before...
Installed the CTRWxpxx package and followed the steps below ...


http://www.officeprinting.xerox.com/infoSMART/cgi-bin/webcgi.cgi

 infoSMART Solution



















       Bookmark this page now!






       Printer friendly version


  Configure a network (TCP/IP) connection for Sun Solaris 2.6.x, 7 & 8

  Solution Details
  Configure Sun Solaris 2.6.x, 7 and 8 for a network (TCP/IP) connection


  This procedure is for all internal PhaserShare cards, and redirects the
print jobs to the
  printer's AppSocket port (port 9100) instead of the LPD port (port 515).


        Note: In all cases, the # represents the root prompt.


  Configure the PostScript filter
     1. Log in to the system as root.
     2. Enter the command #lpfilter -f postprint -F /etc/lp/fd/postprint.fd at
the root
        prompt.





  Configure a queue
     1. Edit the file /etc/hosts to create a [printerhostname] entry for the
printer.
     2. Enter these commands at the root prompt:


        #lpadmin -p [queuename] -o protocol=tcp,
        dest=[printerhostname]:9100
         -T PS -I postscript -v /dev/null -i
         /usr/lib/lp/model/netstandard
        #enable [queuename]
        #accept [queuename]



        Note: There are NO spaces between protocol and 9100; [printerhostname]
must be the
        same name as entered in the /etc/hosts file; and -I PostScript is an
uppercase i not
        a lowercase L.





----- Forwarded by Nikul Raval/TRYTN/DIAG/US/BAYER on 08/09/2002 10:19 AM
-----

                      "Manesh, Nasser (CAP,
                      PTL)"                         To:
nikul.raval.b@bayer.com
                      <nasser.manesh@penske.        cc:
                      com>                          Subject:  exec exit fault
on xerox printer - did you figure it out?
                      Sent by:
                      nasser@int-ch1gw-2.onl
                      ine-age.net


                      08/08/2002 04:39 PM






Hi there,

While searching on google I saw your post on exec exit fault
error while trying to print from Solaris to a xerox
printer.  I have the exact same problem.  Did you by any
chance figure it out?

Thanks a lot,

--Nasser

(See attached file: nasser.manesh.vcf)

[demime 0.99c.7 removed an attachment of type application/octet-stream which had a name of =?iso-8859-1?Q?nasser.manesh.vcf?=]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers