Thanks for all the responses (and congratulations to those of you on holiday!) The first consensus was that, since the A1000 is a hardware raid device, the "disks" are really LUNs and are perhaps remnants of a previous install. Regardless, they don't map to the number of physical drives in the box. The second set of suggestions (thanks specifically to Mitchell Bruntel) took me back to the old days of re-seating cards in VAXen - I removed all the drives from the array (after which two drive lights were still green) and cycled power. At this point I was able to successfully load the proper firmware with fwutil (and upgrade to the latest revision.) I then reinserted each drive. All now appears as it should and I can create LUNs. Thanks, all! -- John BOSSERT _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Mar 17 12:37:09 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:30 EST