Actually not much to summarize :) Thanks for those who reply, and those out-of-office message also. Special thanks to Daniel Wilkinson, he gave me the cfgadm command and it works !!! cfgadm -la shows the card is actually on controller 2 (c2), connected but unconfigured. then, cfgadm -c unconfigure c2 cfgadm -c configure c2 # <-- this is the magic Now the disk is detected by format, he also told me that target of disk will be the WWN, no way to change it. I am happy already. Thanks all again. Shen Yuguo On Mon, Mar 22, 2004 at 09:51:18PM +0800, Shen Yuguo wrote: > Hi gurus, > > We have a newly purchased V880 with Fibre Card (X6767A, said to be > QLA2310). When connected to IBM ESS 2105-F20, from the OK prompt, we can > use "probe-scsi-all" to detect allocated disk on ESS, but when boot to > OS (Solaris 9 with latest patch), no disk will be discovered. > > I've tried to installed IBM-approved QLogic driver 4.13, but after > reboot -- -r, the card is still driven by SUNWqlc, not QLA2300. > > Hope you guys can point me to the right documents about the > configuration of qlc.conf or how to change to use qla2300.conf > > Thanks and I will summarize ... > > Shen Yuguo > -- > A wise man can see more from the bottom of a well than a fool can from a > mountain top. > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Mar 23 10:27:17 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:30 EST