The problem really was a disconnected power cable inside enclosure. I apologize for wasting valuable time and resources. I would like to thank especially Darren Dunham who communicated back and forth on this case. I placed the 250 GB IDE disk on Blade2000 (should also work on Ultra10) scsi chain to get the disk up quick. Solaris 8 (Generic_108528-12), OPB 4.2.4. Format sees it now: 4. c0t14d0 <ATA-WDC WD2500PB-15.0 cyl 60563 alt 2 hd 64 sec 126> /pci@8,700000/scsi@6,1/sd@e,0 Part Tag Flag Cylinders Size Blocks 0 root wm 0 0 (0/0/0) 0 1 swap wu 0 0 (0/0/0) 0 2 backup wu 0 - 60562 232.88GB (60563/0/0) 488380032 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 0 - 30280 116.44GB (30281/0/0) 244185984 7 unassigned wm 30281 - 60562 116.44GB (30282/0/0) 244194048 Note: 232.88 GB size in machine = 250 GB size by vendor x 0.9313 where 0.9313 = (1000/1024 kb) (1000/1024 kb) (1000/1024 kb). format.dat was not needed. > -----Original Message----- > From: Paramasivam, Meenakshisundaram > Sent: Tuesday, April 06, 2004 6:14 PM > To: 'sunmanagers@sunmanagers.org' > Subject: SCSI-IDE Ultra10 > > Hi, > > I have WD2500PB disk and AEC-7726Q SCS-IDE bridge > connected to Ultra 10 running Solaris 8 (Generic_108528-17) > with OBP 3.19 > > probe-scsi-all: > can not find this particular drive > format: > can not find this particular drive > > I do not want to use on-board 24-bit IDE controller. I did boot -r. > > Question: > What will resolve the problem? (Looks like firmware, OS and patch updates are due). > > FYI: > I have WD2500JB working fine via SCSI-IDE bridge on a Blade1500 running Solaris 8 (Generic_108528-27) with OBP 4.9.5 (2003/09/15). > > Thanks in advance. > > Sundar _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Apr 7 19:15:38 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:30 EST