It seems that the DHCP server (Sun DHCP) does not pick up changes to macros w/o a restart (dhtadm). This is not the case with the client tables (pntadm), which is what through me. Eric Noriega wrote: > We've been having an issue with using jumpstart with our Netra > X1's. Recently we migrated from the std. RARP boot to a DHCP boot. > We have been getting the following errors. On one system it seemed to > clear up mysteriously (or at least I can figure out what I did :) ). > > When booting we get the following: > > ok boot net:dhcp - install > Boot device: /pci@1f,0/ethernet@c:dhcp File and args: - install > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Timeout waiting for BOOTP/DHCP reply. Retrying ... > Failed to receive config params > Restarting DHCP process ... > TFTP server's IP address not known! > > We do have the correct definitions in the dhcp server (Sun dhcp), > and the machine is being assigned the entry. I wanted to see if > others had encountered this problem, before I dive too deep. > > Thanks, > Eric Noriega > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Apr 30 16:38:58 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:32 EST