SUMMARY: Trouble connecting to a 3310 Array Using ssconsole

Well my brain deffiniely isn't working well today.
I was putting in the IP address of the ARRAY instead of the HOST under
server setup in the ssconsole GUI which is deffinitely why it didn't work.

I went through the configuration steps and now I can also telnet into the box.

Here's my original question.

I have a V250 with Solaris 9 on it.
I installed the CLI packages
 1  SUNWsccli     Sun StorEdge(tm) 3000 Family CLI
                   (sparc) 1.5.0,REV=2004.02.03.12.27
  2  SUNWscsa      Sun StorEdge(tm) Diagnostic Reporter daemon
                   (sparc) 1.5.0,REV=2004.02.03.13.26
  3  SUNWscsd      Sun StorEdge(tm) Configuration Service Agent
                   (sparc) 1.5.0,REV=2004.02.02.13.24
  4  SUNWscsu      Sun StorEdge(tm) Configuration Service Console
                   (sparc) 1.5.0,REV=2004.02.03.13.25
  5  SUNWscui      Sun StorEdge(tm) Diagnostic Reporter console
                   (sparc) 1.5.0,REV=2004.02.03.13.26
and The daemons are running

 root   235     1  0 09:34:17 ?        0:00 /usr/sbin/ssmon
    root   231     1  0 09:34:16 ?        0:00 /usr/sbin/ssserver

I can connect to the Array via the tip command no problem. I've configured the 3310 using
tip and can see the array no problem. I added an IP address to the 3310 and can ping the 
Array from any host.

Trouble is when I execute ssconsole and add the array I get the "discovering" message
and it never connects to the array.

Are there any tricks to get ssconsole to connect to the 3310?

I was told by the SUN rep that I  have to be able to telnet into the array before ssconsole 
can connect. Is this correct? When I try to telnet into the array it just says trying to 
connect but never does. I didn't notice any references to telnet in the CLI manual.

Thanks much!
David Martini
LLNL
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers