Thanks to all who replied (Tom Payerle, Victor Engle, and Vincent Bolay). Initial problem: multipathing/failover with a dual HBA from Emulex (the LightPulse LP9802DC). Suggestions received: 1. Look at Veritas Volume Manager 2. See what your storage vendor has in the way of RDAC drivers Also, multipathing is less of an issue than failover. Action take: 1. Downloaded IBM RDAC driver for FAStT (taken from the FAStT Storage Manager package) 2. Installed 3. Failover works on a very limited basis (see below) Current problem: 1. Panic when data is copied onto new SAN partition I can run newfs, mount the filesystem, touch a file, and list the files on the new filesystem. I can even pull cables and it will failover (i.e., I can continue to do a file listing). But when I attempt to copy a file onto the new partition it panics. Anyone see this before? I am not getting a lot out information from /var/adm/messages, etc. This is Solaris 9, and I am looking into kernel patches. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Nov 2 18:21:42 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:39 EST