Sunmanagers, I have a solution to my A1000 lad issue. The original message was: I have an A1000 exhibiting odd behavior. It appears to be operating correctly except for when I go to view the luns using lad. Lad reports 10, yes 10, identical instances of the controller. Since the machine is in a test environment, I have been able to connect it to a "clean" machine and I get the same results. Has anyone seen this before and is it caused by the controller? I have tried a different, known good terminator and cable to eliminate any "echo" on the SCSI bus. I received 3 responses, 2 of which had me verify the connection to the server and validating the terminator's condition. The 3rd response from David Deaves solved my issue. His response read: The only times I have seen things occur multiple times on a scsi bus is when their scsi id matched the controller's (normally 7), so maybe check that. After checking the ID, I discovered I had overlooked this and Dave was right. Again, Thanks for the help. Bruce _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Jan 28 17:24:30 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:43 EST