Thank you Charles for your reply. Well it seems now I have a fast data access mmu miss also. I tried new memory and disconnecting the hard drive to make sure that wasn't the problem. This system is all messed up. I think the mother board is bad. I just thought I let everyone know so I don't waste your time. We are just going to replace the system board. Thanks everyone, Al -----Original Message----- From: Charles Mengel [mailto:charles.mengel@legnemgroup.com] Sent: Thursday, July 28, 2005 11:19 AM To: Al Saenz Subject: RE: no output from probe-ide Al - Do you have a non-Sun supplied disk you've just installed? I've had this problem when I've tried to install non-Seagate IDE disks into IDE based systems. Charles Mengel LGI -The Legnem Group, Inc 5501 Twin Knolls Rd Suite 107 Columbia MD 21045 410-997-1393 -----Original Message----- From: sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Al Saenz Sent: Thursday, July 28, 2005 11:07 AM To: sunmanagers@sunmanagers.org Subject: no output from probe-ide Hello Sunmanagers, I have a Netra AX1105 system with Openboot 4.0. When I run probe-ide at the ok prompt I get the ok prompt. Has anyone seen this or now the cause? Thank you Al _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Jul 29 10:11:16 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:50 EST