Many thanks to Peter Stokes, Peter Wallis, Eric Falon, and E. Turns out the RSM trays are "Differential SCSI", so I need an X6541A HVD SCSI card to connect to the 219 RSM. The Unipack is single ended SCSI. The 219 is high voltage differential. Here is my original posting: > Hello, > > I have a Sun SPARCStorage Disk Array 219 RSM that I want to connect to > the SCSI port on my Ultra 30. I get the following message after > connecting the unit and booting up: > > "Fatal SCSI error at script address 10 Unexpected disconnect > Can't open boot device" > > I can attach a Unipack set to SCSI ID of 4, and no problem with that. > So I know my cables and Ultra 30 are fine. I think it might be the > SCSI ID settings on the WDS2 card on the array, but I don't have a > manual to change the settings, and there are no settings displayed on > the card. Anyone out there know what these settings might be, or > perhaps the unit is incompatible with the Ultra 30? Thanks. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Aug 8 21:06:03 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:50 EST