Thanks to: daniel.denes@bankgesellschaft.de aditya.n1@rediffmail.com and a few out-of-offices It turned out that the name of the back-up link was not entered into DNS although it had been entered into NIS+ host table. Once the name was added, the server(IPMP) works like a champ. Regards Alan Alan Kong wrote: > Dear All, > > We have a Sun Fire V240 server config. to run multi-pathing with the 2 > on-board bge NICs. The configuration was directly from the document by > Rodrick Brown. There was no problem in accessing remote file systems > using auto-mount at start-up. > > However, some remote file systems were inaccessible after a few hours > and the following were observed in syslog file: > > Aug 12 11:28:41 esunvx240 nfs: [ID 664466 kern.notice] NFS access > failed for ser > ver cuees9: error 7 (RPC: Authentication error) > Aug 12 11:28:46 esunvx240 last message repeated 3 times > Aug 12 11:28:58 esunvx240 nfs: [ID 664466 kern.notice] NFS access > failed for ser > ver mailhost: error 7 (RPC: Authentication error) > Aug 12 11:28:58 esunvx240 last message repeated 1 time > Aug 12 11:30:33 esunvx240 nfs: [ID 664466 kern.notice] NFS lookup > failed for ser > ver cuees9: error 7 (RPC: Authentication error) > Aug 12 11:30:46 esunvx240 last message repeated 131 times > Aug 12 11:53:47 esunvx240 in.mpathd[103]: [ID 585766 daemon.error] > Cannot meet r > equested failure detection time of 10000 ms on (inet bge1) new failure > detection > time for group "production" is 48202 ms > Aug 12 11:54:47 esunvx240 in.mpathd[103]: [ID 302819 daemon.error] > Improved fail > ure detection time 24101 ms on (inet bge1) for group "production" > Aug 12 11:54:47 esunvx240 in.mpathd[103]: [ID 302819 daemon.error] > Improved fail > ure detection time 12050 ms on (inet bge0) for group "production" > Aug 12 11:54:48 esunvx240 in.mpathd[103]: [ID 302819 daemon.error] > Improved fail > ure detection time 10000 ms on (inet bge1) for group "production" > Aug 12 13:53:54 esunvx240 in.mpathd[103]: [ID 585766 daemon.error] > Cannot meet r > equested failure detection time of 10000 ms on (inet bge1) new failure > detection > time for group "production" is 45892 ms > > cuees9 is the application server where ssh and other application > resides and ssh starts when the v240 start-up. > mailhost is the mail server where /var/mail hangs from there. > > The current platform running on v240 is Solaris 2.9 in a NIS+ > environment. > > Pls advise on: > - whether IP multi-pathing works in NIS+ with auto-mount environment; > - suggestions on solving the problem; > - is there any config. varibles I need to to change? > > Thank you. > > Regards > Alan _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Aug 16 09:12:50 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:50 EST