Just to late you know : I just upgraded OpenBootProm to 4.17.1 on the V480. "post-trigger" variable has vanished. This is replaced by the "post [level [verbosity]]" command which will launch POST according to given options. Here is a sample from the PDF included with the latest Prom update patch : About the post Command The post command enables you to easily invoke POST diagnostics and to control the level of testing and the amount of output. When you issue the post command, OpenBoot firmware performs the following actions: Initiates a user reset Triggers a one-time execution of POST at the test level and verbosity that you specify 10 OpenBoot PROM Enhancements for Diagnostic Operation July 2004 Clears old test results Displays and logs the new test results Note The post command overrides service mode settings and pending system controller bootmode diag and bootmode skip_diag commands. The syntax for the post command is: post [level [verbosity]] where: level = min or max verbosity = min, normal, or max The level and verbosity options provide the same functions as the OpenBoot configuration variables diag-level and verbosity. To determine which settings you should use for the post command options, see TABLE 1 for descriptions of the keywords for diag-level and verbosity. You can specify settings for: Both level and verbosity level only (If you specify a verbosity setting, you must also specify a level setting.) Neither level nor verbosity If you specify a setting for level only, the post command uses the normal mode value for verbosity with the following exception: If the normal mode value of verbosity = none, post uses verbosity = min. OpenBoot PROM Enhancements for Diagnostic Operation 11 If you specify settings for neither level nor verbosity, the post command uses the normal mode values you specified for the configuration variables, diag-level and verbosity, with two exceptions: If the normal mode value of diag-level = off, post uses level = min. If the normal mode value of verbosity = none, post uses verbosity = min. -- Sebastien DAUBIGNE Sebastien.daubigne@atosorigin.com mailto:Sebastien.daubigne@atosorigin.com> - +33(0)5.57.26.56.36 AtosOrigin Infogerance - IMS/ERP/Pessac -----Message d'origine----- De : sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org]De la part de Sebastien Daubigne Envoyi : jeudi 29 septembre 2005 10:34 @ : sunmanagers@sunmanagers.org Objet : SUMMARY : Force POST without power-on/off Wow, 5 minutes later, Philippe sent me the good one, thank you : >> De : Ghazarian, Philippe [mailto:pghazarian@ixis-cib.com] >> >> setenv post-trigger user-reset >> reset-all -----Message d'origine----- De : sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org] De la part de Sebastien Daubigne Envoyi : jeudi 29 septembre 2005 10:22 @ : sunmanagers@sunmanagers.org Objet : Force POST without power-on/off Hi, Do you know any way to force a Power-On-Self-Test on Sun servers via any software/OBP command : I mean without harwdware power-on via manuel intervention on the front panel/key switch. I tried setting "diag-level" to "max" and diag-switch to "true", then "reset-all", but it doesn't start POST. Note : the server is a V480 and I only have standard serial console access (no RSC). Thanks. -- Sebastien DAUBIGNE Sebastien.daubigne@atosorigin.com - +33(0)5.57.26.56.36 AtosOrigin Infogerance - IMS/ERP/Pessac _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers -------------------------------------------------------- Ce message et toutes les pihces jointes peuvent jtre confidentiels, et, de plus, peuvent jtre couverts par un privilhge ou une protection ligale. Il est itabli ` l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme ` sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse prialable. Toutes opinions exprimies dans ce message, sont personnelles ` leur auteur et ne sauraient nicessairement refliter celle de IXIS CIB / IXIS Corporate & Investment Bank, de ses filiales ou de sa maison mhre. Elles sont aussi susceptibles de modification sans notification prialable. Tous droits riservis. Si vous recevez ce message par erreur, merci de le ditruire et d'en avertir immidiatement l'expiditeur. Toute communication avec IXIS CIB / IXIS Corporate & Investment Bank peut jtre contrtlie, enregistrie et conservie. IXIS CIB / IXIS Corporate & Investment Bank dicline toute responsabiliti au titre de ce message s'il a iti altiri, diformi ou falsifii. Les communications sur Internet n'itant pas sicurisies, IXIS CIB / IXIS Corporate & Investment Bank informe qu'il ne peut accepter aucune responsabiliti quant au contenu de ce message. This email and any attachment may be confidential and may also be legally privileged or otherwise protected from disclosure. It is intended only for the stated addressee(s) and access to it by any other person(s) is unauthorised. Any use, dissemination or disclosure not in accordance with its purpose, either in whole or in part, is prohibited without our prior formal approval. Any opinion expressed in this message may be personal to the author and may not necessarily reflect the opinion of IXIS CIB / IXIS Corporate & Investment Bank , its affiliates or parent company. It may also be subject to change without prior notice. Copyright reserved. If you are not an addressee, you must not disclose, copy, circulate or in any other way use or rely on the information contained in this email. If you have received it in error, please inform us immediately and delete all copies. Any communication made with IXIS CIB / IXIS Corporate & Investment Bank (whether personal or business) may be monitored and a record kept. Neither IXIS CIB nor IXIS Corporate & Investment Bank shall be liable for the message if altered, changed or falsified. As communication on the Internet is not secure, IXIS CIB / IXIS Corporate & Investment Bank does not accept responsibility for the content of this message. -------------------------------------------------------- _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Sep 30 04:07:29 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:52 EST