Hi All The solution was to edit the nvalias's to include the ide CDROM Procedure get to ok prompt show-disks command select ide cdrom nvalias cdrom ^Y - and add specific device 2,0:f to end of ^Y nvstore - to write away Then you can boot cdrom from IDE CDROM Peter Hi All I have a curious problem. The Netra T1/105 has a version of the CP1500 board as its CPU board and all of the Netra T1/105's I have ever seen have always said 'Netra T1' etc on the banner and worked fine with the IDE CDROM, until now...... This one has the correct part number, but refuses to say it is a Netra T1, just says it is a Cp1500 and here is the real problem, has just SCSI devices in its devalias and refuses to see the IDE CDROM, so I can only boot a SCSI CDROM. Anyone know how to 'tweak' a CP1500 back to its Netra mode? I have tried Googling etc and can find no ref to this. I have also tried using the Netra Firmware update which works fine, but makes no difference. Bizarre!! Lastly I tried swapping the I/O card, again no change. The unit works 100% apart from this. Thanks Peter ------------------------------------ Peter Stokes Tel: +44 (0)115 822 6556 Mbl: +44 (0)7977 532320 ------------------------------------ _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Oct 13 13:53:31 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:52 EST