Hi agn, <original posting below> not a real solution for the initial problem, but a workaround: I had two LVD320 cards lyin' around, plugged them into the nodes, and voila, it works. Seems to me that the dual-cards are not supported in Solaris 10 x86... I also tried to install the glm-driver for Solaris 9, hm, not very successful: the package was installed without any error, but the driver could not be loaded, since it's 32 bit (and Sol. 10 is 64 bit). So, it works now, and as the V40z has enough slots, it's a good solution for me. Have a nice hackin', Harald -----Urspr|ngliche Nachricht----- Von: sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org]Im Auftrag von Harald.Husemann@materna.de Gesendet: Montag, 5. Dezember 2005 18:49 An: sunmanagers@sunmanagers.org Betreff: SUN V40z, Sol. 10 and SE3310 Hi folks, I'm currently setting up an SC 3.1, consisting of two V40z running Solaris 10 x86 and two SE 3310. So far, everything's fine, but the nodes do not see the logical drives at all... Both nodes are equipped with a "SUN PCI dual gigabit ethernet + dual SCSI host adapter" card. docs.sun.com tells me that I need a driver to use this card, since it's not included in Solaris. But, the driver is only available for Solaris 9, not for 10... So, maybe it's not needed any more? Or am I missing a patch or something? (I've used EIS-CD 251005 to patch the systems.) Or should it work, and I have a misconfig somewhere else, maybe on the storages? Anyone got this workin' before? Thanks in advance, will (of course) summarize. Harald _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Dec 6 07:36:28 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:53 EST