Thanks to those who have responded. As I suspected I'll have to build a OSREL case statement around / into my original script. Just like many other post jumpstart finish scripts. Ho hum Stuart > -----Original Message----- > i.e. > > > Solaris 10 > --------------- > # nslookup 10.48.2.23 > Server: 10.54.20.10 > Address: 10.54.20.10#53 > > 23.2.48.10.in-addr.arpa name = awacs > > > Solaris 9 > ------------- > # nslookup 10.48.2.23 > Server: DNS1 > Address: 10.54.20.10 > > Name: awacs > Address: 10.48.2.23 > > What I am then grep'ping and awk'ing for is the output to be like "^Name" but as you can see in Sol 10 the ip address is presented first and in reverse order. It is killing one of my logon / audit scripts. > > Any help would be appreciated. > > Stuart Saxon > _____________________________________________________________________ The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales). The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Feb 6 09:36:50 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:55 EST