found a good response earlier in this very list. not quite the same situation, as the disks are the same size, but the methods are what i needed. http://www.sunmanagers.org/pipermail/summaries/2005-February/006160.html thanks to those who responded so quickly! -chris >>> Chris Pelton 2/23/2006 1:40 pm >>> hi all, is it possible to manually change what solaris sees for disk geometry? i need to replace a mirrored disk in Sol8, DiskSuite 4.2.1 and would prefer to change the geometry table if possible rather than manually creating partitions of the same cylinder size. i recall doing this before but can't locate the method used. thanks, chris _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Feb 23 14:27:22 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:56 EST