Dear all, First off can I thank everyone that responded, more specifically Iain and Aaron. My issue was resolved by running the command 'eeprom output-device=screen:r1024x768x75' as root I ran the command from user land and waited for the nightly reboot, hey presto all works fine the next morning. Before my output-device was only set to 'screen'. Thank you again. Cheers, William On 24/03/06, William <willay@gmail.com> wrote: > Hello list, > > I have a batch of 6 V210's with the XVR-100 product installed, during > the o/s installation I had the display working by setting the > output-device variable and rebooting. Everything seemed fine until we > had these racked up and in production, we are trying to use a new KVM > system on the boxes but they are not responding on VGA at all. > > We have tried having the KVM installed correctly while the machines > reboot but we are still getting a blank screen. > > When we plug in a standalone monitor and Sun KB (taking the KVM out of > the equation) we get a white screen on the monitor and nothing else. > > Using prtdiag I can confirm it shows the graphics card as : > > 'SUNW,XVR-100 (Display) SUNW,375-3181 okay /pci@1d,700000/SUNW,XVR-100@1' > > Thank you for your time. > > Regards, > > Will _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Mar 30 01:07:43 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:57 EST