Thanks to all for their suggetions. Well I did Hardware PROM upgrade to rev. 3.31 but it still didn't worked untill i powered OFF and ON again. Thanks again to everyone for their support... My original post was: >> Hi Gurus, >> I have an Ultra60 with 256MHz CPU. Recently i upgraded 256 MHz to >> dual 440MHz as it was running out of resources lately. After >> installing the new CPU part no. 5539-04 rev. 4 (on both CPUs) it >> didn't start. So i removed one CPU and tried and box did came up but >> CPU still shows 256 MHz instead of 440Mhz. I changed the Jumper >> setting J3001 as well and also upgraded PROM from 3.11 to 3.31 but >> CPU still shows 256 Mhz. My question is: >> 1) Why CPU click setting shows 256 Mhz instead of 440 Mhz >> 2) When i put both CPUs of 440 Mhz system won't boot (no power on light) >> >> Any help is greatly appreciated. >> Regards >> shahb >> _______________________________________________ >> sunmanagers mailing list >> sunmanagers@sunmanagers.org >> http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon May 15 14:20:17 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:58 EST