Original question: > I have an Ultra 45 with an XVR-100 running Solaris 10 6/06. > This board has two head capability, with one VGA out and one DVI out. > It defaults to using to VGA. > How do I switch it to use the DVI instead of the VGA? What I discovered is not an answer to this question, but rather two notes that make it moot in my case. Both of these are from the XVR-100 installation guide: Note - The maximum supported screen resolution for the DVI port is 1280 C 1024. Note - Only the Sun XVR-100 graphics accelerator HD15 video output connector can provide console output. You cannot set the DVI video connector as the console. Since I'm using a 24" LCD at 1920x1200, as my console, I guess I'll stick with VGA. The picture is beautiful anyway. -- David L. Markowitz dav@rttrek.com _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Aug 11 14:19:32 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:00 EST