Thanks to all who replied: Aaron Lineberger Victor Engle Dana Hudes Sandwich Maker Joe Fletcher Kevin Counts The 3800's backup image was indeed missing a platform-specific driver necessary for that image to boot on the 280R. The things that are key: - You must rebuild /dev and /devices and /etc/path_to_inst with valid configuration for your platform (in my case, I overlayed these from the jumpstart image prepped for that host) - If you're booting a 280R using internal Fibre Channel disks, /kernel/drv/qlc, qlc.conf, and /kernel/drv/sparcv9/qlc have to be there, as well as the appropriate aliases in /etc/driver_aliases. Necessary or not, I added a forceload: drv/qlc into my /etc/system, and I'm now up and running. As an extra step, I'm going to have the relevant files needed for the DR restore added to the production 3800 host so that they will be on the tape next time. Thanks all, Angelo _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Sep 15 14:24:00 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:01 EST