With the built in RAID controller when the machine is booting up hit the Ctrl+C to start the LSI Logic Configuration Utiltiy. This link explains the different screens and how to configure the striping and mirroring. http://docs.sun.com/source/819-1157-16/app-biosraid.html#pgfId-1003503 It was very simple to setup. Dave Martini Below is my original question I have a new X4200 with 4 internal drives. I haven't worked with this hardware before but it appears there is an internal RAID controller that can be used to strip and mirror the internal drives. I can't find any documentation on how to do this. In the past I've used SUN's Disksuite to strip and mirror the internal drives but if this has a hardware RAID controller I'd like to use that. Has anyone done this on an X4200 before or can point me to some docs. Thank you. Dave Martini LLNL _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Nov 6 17:09:10 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:02 EST