thanks to Rachel Polanskis, joe fletcher and Adam 'Ace' Rappner but there is a mistake i did i added a secondary jumpstart server on my network, to server S10U3 but a mistake with tftpd's argument result in that client got miniroot from old jumpstart server (S10U2) that's explain the existence of /etc/hostname.ipge0 original message: > i'm trying to install S10U3 on a new T2000, with jumpstart. > When the T2000 reboot after installation, there is no network, because > it tries to plumb ipge0: > ... > Failed to plumb IPv4 interface(s): ipge0 > ... > but ipge never exists in solaris 10U3, it has been replaced by e1000g! > i can plumb manually e1000g: > bash-3.00# ifconfig e1000g0 plumb > bash-3.00# ifconfig e1000g0 fury > bash-3.00# ifconfig e1000g0 > e1000g0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > inet 192.168.0.26 netmask ffffff00 broadcast 192.168.0.255 > ether 0:14:4f:22:34:b2 > > but still continue to have no network! > > This happened when the machine boots: > Dec 18 07:14:59 fury genunix: [ID 540533 kern.notice] ^MSunOS Release > 5.10 Version Generic_118833-33 64-bit > ... > Dec 18 07:15:25 fury svc.startd[7]: [ID 652011 daemon.warning] > svc:/network/physical:default: Method "/lib/svc/method/net-physical" > failed with exit status 96. > ... > Dec 18 07:18:27 fury mac: [ID 543131 kern.info] NOTICE: e1000g0/0 registered > Dec 18 07:18:27 fury e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 > Network Connection, Driver Ver. 5.0.11 > ... > > why method related to network appears before driver e1000g is loaded? _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Dec 18 09:52:56 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:03 EST