I finally found that /kernel/drv/lpfc.conf was misconfigured. Parameter nodev-holdio was set to 1 instead of 0: # If set, nodev-holdio will hold all I/O errors on devices that disappear # until they come back. Default is 0, return errors with no-device-delay. nodev-holdio=0; Vincent Original question: > Hi, > I just installed a Netapp cluster 3020 and wanted to present some LUNs > to a V240 with Solaris 9 (recently patched), Veritas Volume Manager > 4.1 MP1 and an Emulex 9002L. The filers and the host are attached to a > McData switch and properly zoned. I was able to create a VM volume and > a filesystem. The host sees both pathes: > > vxdisk list c3t0d0s2 > . > . > Multipathing information:. > numpaths: 2 > c3t0d0s2 state=enabled type=secondary > c3t1d0s2 state=enabled type=primary > > I tested the failover on the filer, and the host was not able to use > the secondary path. Commands like ls, touch, format, devfsadm, vxdisk > hang, but the machine is still up and running. > > I would appreciate if someone ran into the same issue and could share > his experience. I will summarize. > > Vincent _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Jan 24 04:44:16 2007
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:04 EST