Hi, Solved. Root cause was me being a ditz and not remembering that Sol10 x86 includes it's own (broken as it turns out) versions of the emulex drivers. I blithely installed Emulex's own drivers which promptly broke everything further. However, once I'd remembered about the SUN drivers I went looking for patches and 120223-16 appears to have fixed everything. Cheers Thanks to those who replied. Joe ----------------------------- originally ------------------------------------------------ Here's a bit of an odd one. Just built a new DL360 with Solaris10 x86 11/06. The machine has two Emulex LP10K adapters in it. I built the machine, installed the emulex drivers, everything is happy. We then swapped the DVD-ROM drive used for the installation with a standard CD drive. Since then the HBAs don't show up under solaris. Previously the Emulex utils showed the two adapters quite happily and they listed under cfgadm as controllers c2 and c3. Since the swap the Emulex tools say "no adapters installed" and the c2 and c3 controllers listed under cfgadm have gone. Hardware still sees the cards ok. Drivers are loaded ok. Aaaanyone got any ideas? I'm arranging to have the DVD drive swapped back (machine is in the US, I'm in UK) but it seems a little bizarre that this would be the cause. Cheers Joe _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Mar 26 10:47:26 2007
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:05 EST