Hi Thanks to everyone who responded to my question regarding the /etc/netmasks file. Most responses focussed on the fact that I had specified the base address of the physical subnet rather than the VLAN my machine is sitting on. So to this end, I'm going to test this change (the week after next unfortunately), and report back to the list on success/failure. i.e. Change /etc/netmasks from 131.104.91.0 255.255.255.224 -to- 131.104.91.96 225.255.255.224 Thanks to everyone Scotty ---------- Original message ---------------------------- From: sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Steve Howie Sent: Thursday, October 04, 2007 6:51 AM To: sunmanagers@sunmanagers.org Subject: Problems with /etc/netmasks on Solaris 8 system Howdy I'm having a problem with setting the correct values in /etc/netmasks on a Solaris 8 system. We are moving it from a non-segmented subnet (131.104.96.0) to an IP address (131.104.91.102) in a VLAN on the 131.104.91.0 subnet with a subnet mask of 255.255.255.224. Old netmasks file 131.104.96.0 255.255.255.0 New netmasks file 131.104.91.0 255.255.255.224 The subnet mask is correct for the VLAN. When I reboot the system after moving the ethernet cable to the new subnet, I find the following settings for the interface using ifconfig: IP address: 131.104.91.102 (correct) Netmask: 255.255.0.0 (not correct, should be 255.255.255.224) Broadcast: 131.104.255.255 (not correct, should be 131.104.91.127) I manually corrected the problem by issuing the following command for the interface eri0 after the system was rebooted ifconfig eri0 netmask + broadcast + This works, but I need these values set correctly when the system boots up. Any ideas? Is my syntax incorrect in the new /etc/netmasks file? Thanks - will summarise to the list. Scotty _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Oct 5 09:18:29 2007
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:07 EST