Ok, It turned out the IP/Gateway/Netmask I was using is not working on the solaris 10 x86. The odd thing was when configured this same IP/Gateway/Netmask on Windows, it is working fine. He convinced me that it is not IP problem. I forced the network guy provided me another IP with different Vlan and I am happy camper now. Thanks for your help. Stephanie Original question: Hi again! The same server (HP DL360 - Solaris 10 x86) is giving me one after another problem. I resolved the disk drive and NIC card by installing HP drivers. The server installed Solaris 10 x86 with Network configured fine. The server is up and running except that this server is not accessible. Only the direct console access at this time. The NIC device is 'bnx0' that shows configured with IP address and UP. I have checked all network configuration files that I could think of: hosts, hostname.bnx0, nsswitch.conf, resolv.conf, defautdomain, defaultrouter, ipdodes, networks, netmasks All seems to be fine with the IP and hostname correctly configured. All the networks services are online. 'bnx0' is plumbed and up. Someone please tell me what am I missing here to make this server networked. The only odd thing that if I configure 'bnx0' with DHCP instead of configuring the static IP than the server is accessible fine from in and out from DHCP IP address. Thanks for your help! Stephanie _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Nov 22 00:12:55 2007
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:07 EST