Thank you! On Nov 28, 2007 4:33 PM, John England <john_w_england@yahoo.com> wrote: > Stephanie; > > Go into zonecfg for the zone you wish to create or modify > and run. > > > add net > set physical=eri0 > set address=the ip you want to use. i.e. set address=10.1.1.22 > > The ip will show up as a virtual interface. > > Hope this helps. > > John > > ----- Original Message ---- > From: Stephanie C <stepchung@gmail.com> > To: Sun Managers <sunmanagers@sunmanagers.org> > Sent: Wednesday, November 28, 2007 6:08:58 PM > Subject: Configure zone on the same NIC > > Hi, > > Can I configure the non-global zone (zone1) IP address on the same global > zone NIC card? And how do I do that? My server has only one NIC card. Here > it shows with ifconfig -a: > > lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 > index 1 > inet 127.0.0.1 netmask ff000000 > lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu > 8232 > index 1 > zone zone1 > inet 127.0.0.1 netmask ff000000 > eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > inet 209.xx.xx.xx netmask ffffffe0 broadcast 209.xx.xx.xx > ether 0:3:ba:xx:xx:xx > > Thanks for your help. > > Stephanie > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers > > > ------------------------------ > Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See > how. <http://us.rd.yahoo.com/evt=51732/*http://overview.mail.yahoo.com/> _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Nov 28 19:40:22 2007
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:07 EST