My question concerned trying to log into the SC on some Fujitsu Prime Power 250s we were repurposing. Nobody here had any idea what to try as the uid/password once we'd run out of our "usual suspects" and nobody knew the factory defaults. Several folks hererecommended uids and passwords to try, the most common being "root"/"changeme". The gold cigar, however, goes to Andrey Borzenkov who wrote that there is no factory default, and that you must first set up an account at the OS level before you can log into the SC at all. The utility to do this with is /opt/FJSVmadm/sbin/madmin (menu item 5 therein), which also has some other useful utilities as well. Sure enough, none of these machines had ever had an SC account st up. After poking around in madm, it appears that unlike Sun boxes, on the Fujitsus you have a choice of using either the serial console port or the netmgt console port, but not both. Something to keep in mind the next time we requisition provisioning for Fujitsu boxes in our datacenters... :-) Thanks to everyone who took the time and effort to respond. David Breneman Senior Systems Administrator AT&T eCommerce Systems Engineering Phone - +1.425.288.6052 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Sat Nov 22 10:34:03 2008
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:12 EST