When I first ran the lucreate command to create a Alternate Boot Environment with live upgrade, it bombed out (due to some missing patches which Sun had me install) however, the lucreate command still created the Primary Boot environment. I was a little worried that when running the command, lufslist be.orig the output was listing every filesystem on my machine. Filesystem fstype device size Mounted on Mount Options ----------------------- -------- ------------ ------------------- -------------------------- /dev/md/dsk/d0 ufs 52434567168 / - /dev/md/dsk/d1 swap 6293815296 - - /dev/md/dsk/d3 ufs 52434567168 /var - /dev/md/dsk/d4 ufs 35512123392 /mink - /dev/md/dsk/d100 ufs 146029019136 /data - Rajiv, Gunja, helped me out with the below answer. Thanks for the help Rajiv! Since the PBE is already created, you do not need to worry about it any further. lufslist on you PBE just lists the filesystems which it sees as being associated with that PBE. Once you create your ABE, and run lufslist on that, it will only show / and /var since you created only those on the ABE. The next time when you run lucreate, do not use -c "be.orig", just go ahead with defining the disks. lucreate -m /:/.... -n "be.new" -o /var/log/lucreate.out.log -l /var/log/lucreate.err.log Good Luck. -GGR -- Rajiv G Gunja Blog: http://ossrocks.blogspot.com _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Mar 20 18:03:49 2009
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:13 EST