Turns out yes, I was missing something. SAN_4.4.12_install_it.tar.Z. I had the SUNWsan package installed but to get these host adapters to work I had to install this. Thanks all for the replies. Joe All, I'm trying to add 2 2G QLogic host adapters to a V880 running Solaris 8. Currently I have 2 1G host adapters connected to an A5000 storage array. I want to add another storage array, StoragTek 3510 to ultimately replace the A5000. My plan was to just add 2 more host adapters to the V880, cable it up and just ufsdump/ufsrestore from the A5000 to the 3510. Well, I can't get the server to recognize the new adapters/3510. From the OBP, I can execute probe-scsi-all and a link is established and I can see the 3510. But that's the best I can get. After booting, I lose the link between the 2 new host adapters and the 3510, all lights on the 2 new HBA's stay lighted and the qlc driver is never attached. I have the default qlc.conf. Am I missing something? PCI slots 0 and 1 have the 1G HBA's, PCI slots 2 and 3 have the 2G HBA's. cfgadm shows everything ok. Thanks, Joe _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Jun 7 13:51:26 2011
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:18 EST