I'm sure you found the solution to this problem by now, but in case you haven't, try the following... After applying the most recent patchset to a couple of old Solaris 10 servers, a small issue occured when the hppi utility we used to add printers etc suddenly stopped working. Whenever we tried to run it we were getting: ERROR: machine architecture unknown, cannot continue Luckily we managed to get this working again, very easily by following the steps below. First off you need to find your current platform, you can get this from running uname -a or uname -m. For this example I am using sun4v. Then as ROOT run the following commands cd /opt/hpnpl/admin mkdir backup cp -rp * ./backup perl -pi -e 's/solaris/sun4v/g' * mv option6solaris option6sun4v After you have follwed these steps, you should be able to use the app once more. I found this at http://www.thegeekblog.co.uk/the-geek-blog/2012/11/7/hppi-not-working-on-sola ris-10.html.Received on Fri Dec 21 14:06:26 2012
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 09:24:59 EDT