Some people asked me to summarise any information I obtained
in response to my query as to wheter it is possible to run X.25
on a Sun SLC using the serial connector on the reverse? This is what
I and a colleague here have found out.
The answer appears to be *yes* it is possible. Exactly how depends
on who you talk to.
We finally got a reply from Sun UK who said that it is possible but that
you need a special little gadget that plugs into the back of the SLC
serial port. This is required since the serial port is actually a
combination of *two* serial ports. The "gadget" splits the port into a
standard synchronous RS232 port, capable of running X.25 plus a minimal
RS232, presumably for running a printer etc.
However, a user in Germany is currently using an SLC for X.25 without
any extra equipment. He says the special cable is only necessary if you
want to use the second serial port (/dev/ttyb). (The second port
for asynchronous communication only). The pinout of the connector
for the first port is standard V.24 with pins 2,3,4,5,6,7,8,15,17,20 & 24.
The second port uses the secondary data pins on the V.24 connector,
namely 12,13,14,16,19 and of course 7 for ground. You can find
the pinout in Appendix C of the SPARCstation SLC Installation & Repair Guide.
Thanks to Wolfgang Solfrank for the above information.
The IPC will *NOT* support X.25 at all. All Sparc stations *do*
support X.25.
Hope the information is useful.
Neil
-- Neil Calton UUCP: ..!mcsun!ukc!rlinf!nbc Informatics Department, NSFNET: nbc%inf.rl.ac.uk@nsfnet-relay.ac.uk Rutherford Appleton Laboratory, BITNET: nbc%inf.rl.ac.uk@ukacrl Chilton, Didcot, Oxon, OX11 0QX JANET: nbc@uk.ac.rl.inf England Tel: (0235) 821900 ext 5740
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:14 CDT