What a great list. Quick replies!! First, thanks to the current respondants:
Ken Rossman <ken@shibuya.cc.columbia.edu>
cwilson@adl.austek.oz.au (Chris Wilson)
David Fetrow <fetrow@orac.biostat.washington.edu>
dal@gcm.com (Dan Lorenzini)
curt@ecn.purdue.edu (Curt Freeland)
ldk@udev.cdc.com (ld kelley x-6857)
mis@seiden.com (Mark Seiden)
Dan Butzer <butzer@cis.ohio-state.edu>
and those who will before seeing the summary.
SUMMARY: (full replies on request)
>From Curt Freeland:
J1800 (Just behind the DB15 ethernet AUI connector) is the jumper you need.
The Field Engineers manual says
out forces AutoSense Ethernet (if > 30ma on the +12 return)
out forces thin ethernet
in forces thick ethernet.
>From Dan Lorenzini:
The 4/110 is supposed to figure out which interface to use
automagically. However, in our experience, this does not work
flawlessly. There is a jumper that can be used to force using the
thick interface, and I believe that it is J1800 located near the
ethernet connector. (Jumper in=thick; out=auto select.)
Thanks,
Bill Selig
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:15 CDT