First, many thanks to all who responded. As always there are a whole bunch of people
on this mailing list that really know what they are talking about.
The solution to get tip working with a USRobotics Courier V.32 bis is
1. to turn on verbal mode. This is accomplished by giving the Hayes command ATV1
2. to get the modem return only basic result code. The command is ATX0
Many of the high speed modems return result code that are very
informative, in the case of tip, too informative :-), i.e. the result code
when the link is established is something like:
CONNECT 9600/ ARQ ......
tip expects only the CONNECT part of the result code. In order to remove
uneccessary information in the result code one have to set the modem in basic
result code set. Again, this is achieved by giving ATX0
Many thanks to:
jay@lattice.com
perry@pluto.rain.com
scott@plab.dmll.cornell.edu
hushing@gdwest.gd.com
youn@improv.cit.cornell
sjk@KaPRE.com
dave@goose.ca.pdc.com
============================================================================
Attila Nemeth Phone: +46 8 6320320 Address: SymSoft AB
attila@symsoft.se Fax: +46 8 6320321 Finlandsgatan 52
164 75 KISTA
SWEDEN
============================================================================
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:08:58 CDT